[Elecraft] KPA/C50

[Don Wilhelm]

I cannot find it on the schematic either, but I looked at the board scans on
Tom Hammond's webpage and it looks like it is a bypass on the T SENSE
signal - at least it appears to my eyes as though one side goes to the
ground plane and the other side connects to collector of Q3.  With the
actual circuit board in your hands (instead of the scanned image I was
looking at), you should be able to determine which circuit it actually is
in.

Install it even though it is not included on the schematic. The KPA100 is
know to work fine with it installed.

73,
Don W3FPR

> -----Original Message-----
>
> Working my way through the assembling of the KPA/100 I am unable
> to find the capacitor C50 in the schematic on page 64/65 in the
> manual.   Please?
>