[Elecraft] MicroHam microkeyer

[Don Wilhelm]

Chris and all,

The signals from the K2 are not likely to damage any external RS232 port,
normal RS232 drivers and receivers will handle the signals sourced by the
K2.  BUT - RS232 port signals from the external device WILL DAMAGE THE K2 if
they source signals on the normal DSR, RTS, CTS or RI (pins 6, 7, 8 and 9)
signal lines.

73,
Don W3FPR

> -----Original Message-----
>
>  The issue, I think, is that the
> DB9 on the K2 presents some signals that will damage a 'normal'
> RS232 port if connected with a straight-through cable...
>
> 73 de chris K6DBG
>