[Elecraft] Question on KDSP2

[Matt Osborn]

Tom,

My KDSP2 works as you described, however, my KDSP2 flash firmware
(first number shown) version is 3.18 and KDSP2 microcontroller
firmware second number shown) is 3.10

If I read the errata sheet correctly, you'll need the KDSP2
microcontroller firmware version (second number shown) 3.10 for the
short cuts to work.

On Sun, 23 Oct 2005 21:28:45 -0400, "Tom McCulloch" <thom2 at att.net>
wrote:

>I have K2 firmware version 2.04P  installed in my K2, as shown when I press 
>any key on power up.  I also have KDSP2 firmware version 3.16 installed. as 
>shown on the display when entering the appropriate commands.
>
>According to the KDSP2 Manual Errata (presently posted on the Elecraft web 
>site) I should be able to toggle the Autonotch and the Denoiser on and off 
>directly from the K2 front panel by simultaneously pressing and holding 
>AFIL+SPLIT and AFIL+REC, respectively.
>
>When I do this I get a message on the LED "Not Installed" (appropriately 
>abbreviated, of course).
>
>I am able to perform all of the other DSP functions except for these.
>
>Can anyone tell me what I am doing wrong or how I can track down this 
>problem