[Elecraft] RE: KAT100 woes... Time to 'fess up...

Steven Pituch spituch at ev1.net
Wed Oct 19 12:49:53 EDT 2005


Hi all,
Been there; done that. 

After I finally figured out what I had done and then checked the equipment,
I was very thankful Elecraft makes rugged equipment that can often withstand
some unintentional abuse.

Steve, W2MY



-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Tom Hammond
Subject: [Elecraft] KAT100 woes... Time to 'fess up...

It seems that, during my haste to get everything reconnected (remember,
somewhere about 30 lines above in this treatise)... I'm managed to connect
the RF OUT from the KPA100 to the ANT1 jack on the KAT100 and the coax from
the external antenna switch to the RF IN jack on the KAT100... in short, I
had the RF IN and ANT1 connections reversed!!!!!

Swapped these two connections on the back of the KAT100 and EVERYTHING
WORKED PROPERLY!!!


-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.12.4/143 - Release Date: 10/19/2005
 



More information about the Elecraft mailing list