[Elecraft] one quick point about MDS readings

[K6TFZ at aol.com]

"How do you put the ATU in bypass mode, I looked in the manual but  couldn’t
find it."
 
To bypass the KAT2, go to the menu and set either ATU CALP, ATU CALS or  ATU
POUT (depending on what you want the display to read when pressing TUNE,  see
the chart in the manual) - the KAT2 ANT1 and ANT2 jacks can still be  used
and will be switched as normal.
 
If you want the ATU entirely disable, open the top cover and unplug it,  then
use the lower rear panel BNC jack.

(Thanks, Google.)  Geoff, K6TFZ