[Elecraft] K2 AUX I/O connector

[Don Wilhelm]

Dan,

I don't know if the big AMP will use ALC in any fashion, but it certainly
will not get it from the KPA100 AUX I/O pin 4 - that pin is marked on the
schematic as 'nc' - the KIO2 did pass along the internal ALC signal on pin
4, but it is not used with any of the Elecraft external equipment.

73,
Don W3FPR

> -----Original Message-----
>
>
> Won't the soon to be available big AMP need the ALC Line?
>
> Dan / WG4S / K2 #2456
>
> <snip>
> I know in the past it has been posted to insert a pin in terminal 4 on the
> K2 and remove the same from the corresponding plug to make them unique to
> the K2.
> </snip>
>
> Of course, this is an excellent idea if you are QRP only, like me.
> _______________________________________________
>