[Elecraft] speaker

[Vic K2VCO]

n3drk wrote:
> I connected an external speaker to the ext speaker jack on the back of the k2. However only one speaker
> has audio coming from it. I plugged the same ext speaker into the mark v and the two speakers
> have audio. These are stereo speakers. Should not the k2 have audio coming from both speakers?

The external speaker jack on the back of the K2 is a mono jack.  So if 
the speakers you plug in have a stereo plug, only the speaker that 
connects to the tip will have audio.  You could replace the K2's jack 
with a stereo jack, but then plugging a mono plug into it would short 
the audio.  Best to get an adapter at Radio Shack.

-- 
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco