[Elecraft] K2 IF Alignment question

[Vic K2VCO]

hamblen9 at optonline.net wrote:
> Happy Turkey Day to all,
> 
> Symptom:  In aligning the IF Amp on K2 #5091, I am not hearing any signal
> strength variation when adjusting L34 per the instructions on pg. 62.  The
> weak signal near 7000 khz is relatively loud but moving the slug doesn't
> result in any variation that I can hear.  

There is very little variation when adjusting L34, but you should notice 
it.  The peak is usually quite close to the top of the slug's travel.

-- 
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco