[Elecraft] K2 5087 first breath and some ot stuff

[jferg977 at aol.com]

Thanks,
It's good to know how to do this for sure.
I was otherwise astonished by how closely my k2 tracked the numbers in 
the manual. If memory serves, I hadn't built anything electronic in at 
least 20 years.

-----Original Message-----
From: Don Wilhelm <w3fpr at earthlink.net>
To: jferg977 at aol.com; elecraft at mailman.qth.net
Sent: Sun, 20 Nov 2005 22:42:28 -0500
Subject: RE: [Elecraft] K2 5087 first breath and some ot stuff

John,

Just peak L1 and L2 in any order that you wish.  Go back and forth 
between
them to be certain you get them both peaked. Any interaction is 
minimal, but
go back and forth a couple times just to be certain.

73,
Don W3FPR

> -----Original Message-----
>
> But I do have a question.  The final Part II action is 40 Meter Band
> Pass adjustment where you adjust L1 and L2 for peak signal strength.
>
> I did it doing first L1 and then L2 and did indeed strengthen the
> signal.  Is there some sequence that this should be done in?  Do L1 
and
> L2 affect each other such that this should be a more iterative 
process?
>
>