[Elecraft] ATU problem

[Don Wilhelm]

Slater,

By any chance did you forget to plug in the cable that goes to the AUX RF
connector when you put the top cover on the K2?  That would cause LoPwr
messages.

73,
Don W3FPR

> -----Original Message-----
>
> I have in ATU installed.
>
> When I attempted to tune the rig, I got a Lo P reading.  First time I
> ever had that.
>
> The ATU manual says that POWER setting is too low.  I get the same
> result, regardless of the power setting, regardless of the band,
> regardless of the antenna.
>
> Is old age getting me, or have I overlooked something very
> basic, .... or what?
>
> Any advice will be appreciated.
>
>