[Elecraft] K2/Writelog interface

[Jim W7RY]

Why would you need to do that?  Just make up a simple transistor switch 
from one of the comm ports and hook it to the CW key input jack of the K2.
Writelog will work just fine running the K2 in break in mode.. Or even full 
break in mode. Drive a reed relay with the comm port if you need lower 
resistance to key the K2. They are $3.98 at Radio Shack.

Unless I have missed a turn in the road here.

73
Jim W7RY





At 03:44 PM 5/11/2005, Andy Bullington wrote:
>Thanks to everyone who spoke on this topic. I really appreciate the help. 
>Looks like I'll either have to break down and build the SSB module for the 
>PTT or the WinKey looks like an interesting alternative with lots of 
>flexibility. Much to mull over! Thanks everyone.
>                    Andy W1AWB
>
>_______________________________________________
>Elecraft mailing list
>Post to: Elecraft at mailman.qth.net
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
>http://mailman.qth.net/mailman/listinfo/elecraft
>
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com