[Elecraft] power to remote KPA100/KAT100 question

Tim Logan nz7c at cox.net
Sun May 8 20:45:42 EDT 2005


Hi folks -
I am in the process of building a remote KPA100/KAT100 in an EC2 
enclosure. The KAt100 is done and I am starting the amp.

I have read Lyle and Bob's excellent descriptions of the connections 
between the K2 and the remote unit but in either case I believe (maybe I 
missed it) the KPA100 has a separate power cord from the K2. I would 
like to have one power cord with a  "Y" connection to the KPA100 - and 
have the KAT100 get it's power internally in the EC2 from the KPA/100. I 
would like to be able to have all three modules (the K2, the KPA100, and 
KAT100) turn on via the front on/off switch on the K2.

Is there any reason I should NOT do it this way or a preferred "power 
on" sequence? Thanks folks.

73/Tim NZ7C



More information about the Elecraft mailing list