[Elecraft] k2 alignment and test part 2

[Eric Swartz - WA6HHQ, Elecraft]

Hi Jon,

13.31 kHz is OK. The manual is overly conservative. I think we mention this in 
the errata and on our builders web page at: 
http://www.elecraft.com/Apps/K2info.html. But in any case, we allow for up to at 
least 18 kHz max PLL ref range.

73, Eric  WA6HHQ

jon howe wrote:
> I have made it to page 57, "PLL Reference Oscillator Range Test".
> My high Freq is 12098.42   low freq is 12085.21  Range = 13.21 kHz
> So the range is not between 9.8 and 13 kHz, and I must "refer to 
> Troubleshooting".  I'm stumped.
>