[Elecraft] LSB/USB Audio

[Gregg R. Lengling]

Remember that your filters are also used on transmit (OPT1).  So go back and 
redo your filter aligment per the book and preferably using Spectrograph. 
This is most likely where your problem lies.

Gregg R. Lengling, W9DHI, Un-Retired
K2/100 SN 3075
http://www.milwaukeehdtv.org

----- Original Message ----- 
From: <M1MGD1 at aol.com>
To: <elecraft at mailman.qth.net>
Sent: Wednesday, March 30, 2005 1:28 PM
Subject: [Elecraft] LSB/USB Audio


> Hello all.
> I have been setting up my transmit audio on K2 #4785  lsb/usb,ok here  is
> what ive noticed my usb reports on the conventional usb bands 20/15/10 are 
> great
> no problems also reports on lsb conventional bands 80/40 are also  great.
> When I listen to usb on 80/40 it seems muffled and also the same is true 
> for
> lsb on 20/15/10 ok this is not a issue as I keep to the lsb/usb band
> conventions but can someone tell me why the audio is muffled in this way 
> is it
> desighned to do this.
>
>
>
> M1MGD G-QRP  11355
> Elecraft K1 #1532
> K2  #4785......................72/73..
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com