[Elecraft] Help with Alignment Test - Collecter

[W3FPR - Don Wilhelm]

Alan,

Just look on the PC board silk screening - the C B E designators are printed
on th eboard for these transistors.  If you still have trouble turn to the
K2 Schematic Key sheet in Appendix B of the manual and you will find an
outline of the transistors to aid you in identifying the proper pin.

73,
Don W3FPR

> -----Original Message-----
>
> On page 71 of the assembly manual - Resistance Checks I do not know what
> the collector and base of Q6/Q7 are. Any help will be sincerely
> appreciated. I know what/where Q6/Q7 are, but cannot find a definition of
> the parts to check for resistance to ground.
>
>
> Q7 Collector
> Q6 base
> Q7 base
>
>