[Elecraft] K2 Mods for KPA100

[W3FPR - Don Wilhelm]

Jim,

Those components will not be needed on your K2 (or any other K2 above
SN3000) - it already has the components installed for KPA100 support.
Elecraft does provide those parts in support of those folks having an older
K2 and adding the KPA100.

73,
Don W3FPR

> -----Original Message-----
>
> Just starting on a KAP100 for my K2 SN 4787.  (BTW, in
> my last email I think I quoted the wrong SN.)  First
> thing out of the chute is an instruction sheet to
> change five components and add another to the K2.
> There is a note to be sure to re-align the 12m/10 BPF
> after completing the mod.  Would it be helpful to
> remeasure or recalibrate any other functions?  Looks
> like the second part of the mod is for the VFO ALC.
> Or, should I just presume this is low risk?
>
>