[Elecraft] kat1
Craig Rairdin
craigr at laridian.com
Thu Mar 24 12:00:32 EST 2005
The jumper on P3 should be in the KAT1 position when the KAT1 is in use.
This is in the errata for page 7 of the KAT1 instructions.
Craig
K1 #1966
-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Robert Conley
Sent: Thursday, March 24, 2005 10:36 AM
To: elecraft at Elecraft List
Subject: [Elecraft] kat1
I finished building my kat1 atu and attempting to install it in my k1.
there is a jumper on "p3" next to the antenna connector that I believe
needs to be changed to allow the atu to be used but I did not see any
indication to that effect. I'm on page 8 of the atu manual. any help on
this is appreciated
thanks de "rc" kc5wa
_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
More information about the Elecraft
mailing list