[Elecraft] K1 Question

[Sandy]

My K1 was originally with the 4 band card which I configured for 40/30/20/15 meters.
Added a 2 band card modified for 160 and 80 meters.  The KAT1 tuner works great at 40
meters up
but isn't useful on 160 or 80 except and extremely narrow range of impedances.
Nevertheless the SWR bridge gives useful information at the two lower bands.

73,
Sandy W5TVW
----- Original Message ----- 
From: "Ron Polityka" <wb3aal at verizon.net>
To: ".Elecraft" <elecraft at mailman.qth.net>
Sent: Wednesday, March 23, 2005 8:22 PM
Subject: [Elecraft] K1 Question


| Hello,
|
|  I was wondering if anyone on the list has tried this with their K1 and the
| ATU installed.
|
| Have the 2 band board made for 80 & 17 meters and the 4 band board made for
| 40, 30, 20 & 15 meters. Then swap them out in the field.
|
| Just wondering.
|
| 72 and Thanks,
| Ron Polityka
| WB3AAL
| www.wb3aal.com
| www.n3epa.org/
|
| K1 - SN 01011
| K2 - SN 01392
|
|
| _______________________________________________
| Elecraft mailing list
| Post to: Elecraft at mailman.qth.net
| You must be a subscriber to post to the list.
| Subscriber Info (Addr. Change, sub, unsub etc.):
|  http://mailman.qth.net/mailman/listinfo/elecraft
|
| Help: http://mailman.qth.net/subscribers.htm
| Elecraft web page: http://www.elecraft.com
|
|