[Elecraft] K2 Q7 unstable resistance

[MikeH]

Hello Group,

The build for K2 #4661 continues...

I am doing the final resistance check on p. 71 of the K2 manual (the RF 
board is basically complete now), and I am getting unstable readings on 
the Q7 collector. The readings are all above 500 ohms, as they should 
be, but they are constantly changing. Hopefully this is normal? I get 
the same sort of response on the Q8 collector (although it's not one of 
the resistance checks). All other readings are ok.

DMM is an Extech Instruments 22-816, about 2 years old.

Thanks (again) for your thoughts.

Mike