[Elecraft] Kx1 Mobile Ant
frank
w7is at intergate.com
Fri Mar 4 13:33:48 EST 2005
I've run HF mobile since the 1950's and over the years I found
out what works and what dosn't. The worst mobile ant I
ever used was the type with bottom loading coil. It was
the next best thing to a dummy load. Later I tried
the top loaded Hustlers and they were a little better but
not by much.
Then when the Lakeview Ham Sticks came on the market, the
increased efficiency of that design was amazing. I used
them 40 to 10M with excellent results. Worked a lot of DX on 20M
while in motion using the Ham Stick. The 80M ham stick is mostly
loading coil but it did work better than any other 80M mobile
ant I had tried. On the motor home I finally settled on using
a 40M ham stick on one side and a 20M ham stick on the other side
of the roof. That way I could switch bands on the road.
When spending the night on the road I always tried to stop where
there was a tree nearby to throw up a 35 ft wire
Simply unscrewed the ham stick and used that wire
with a long wire tuner in the vehicle on all bands. That of course
was much better than a 7 ft long Ham Stick.
Its no wonder these hams who are using the center loaded
screwdriver ant's need to have a 500w amp in the vehicle to
be heard :-) Frank W7is
-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/
More information about the Elecraft
mailing list