[Elecraft] Rubber Knob for K2

[W3FPR - Don Wilhelm]

Dave,

If you are referring to the Yaesu FT-900 knob, you can find details on my
website www.qsl.net/w3fpr.  The smaller F-100 knob (with finger depression)
is preferred by some folks, but the FT-900 knob is heavier and my
preference.  I have also seen the Yaesu rubber tire for the FT-900 knob
installed over the stock K2 knob - it takes a small amount of stretching,
but it works FB if you just want to get rid on the sharp outer edge of the
stock knob.

73,
Don W3FPR

> -----Original Message-----
>
> I would like information on obtaining the knob I have
> seen on some
> K2's.  It apprears to be heavy plastic with a rubber
> outter edge.  Anyone
> having information such as part number and source
> please let me know .
>
> Thanks in advance,
>
> Dave K4SV...
>
>