[Elecraft] RE: K2 and KPA 100- How Is Hi Current Generated

[Mike Walkington]

Hi Jim,

Good question.  While I have been troubleshooting the KPA I have left the
KAT100 out of circuit - I don't need it while transmitting into a dummy
load.  The AT-200 has a straight through mode for power measurement that I
am using. I only borrowed the AT-200 for power meter as the KAT100 is
excellent :).

Mike
VK1KCK
K2 #2599 

-----Original Message-----
From: k4zm [mailto:k4zm at comcast.net] 
Sent: Wednesday, 29 June 2005 9:44 AM
To: Mike Walkington
Subject: Re: [Elecraft] RE: K2 and KPA 100- How Is Hi Current Generated

Don:

Do you have the Kenwood AT-200 installed between the KPA100 and the KAT100 
or beween the KAT100 Output and the antenna?  If connected on the output of 
the KAT100 you cannot expect to see an accurate SWR/POWER indication on the 
AT-200.

73
Jim Younce K4ZM
K2  SN: 18