[Elecraft] K2, Noise Gen and Spectrogram
W3FPR - Don Wilhelm
w3fpr at earthlink.net
Mon Jun 27 16:00:30 EDT 2005
James,
A noise source (NG1 will do nicely) and Spectrogram are all that is required
(ignoring the cable to connect the K2 to the sound card input).
Take a look at the K2 Dial Calibration article on my webpage
http:/w3fpr.qrpradio.com for the information you seek. If you want to
bypass all the information contained there about setting the reference
oscillator, just skip to "Step 3, Cal FIL". There are links to additional
information should you need it.
There is also information on the Elecraft website - look in the Builder's
Resources pages.
73,
Don W3FPR
> -----Original Message-----
>
> I need to set my K2 Filters. After I had changed one of my chips
> a few years
> ago, I know by operating my K2 that the filters are 'off' and need to be
> reset. I had forgotten about it until this Field Day when my K2
> was promptly
> removed from the table when the filter problem was 'found'. My friend
> previously set them originally using a noise generator and
> spectrogram. How
> is this done? Is spectrogram and a noise generator all I need? I just
> ordered the Elecraft NG1.. will this suffice along with Spectrogram? Does
> someone have a nice written web page or technical archive on using
> spectrogram with any kind of noise generator? Thanks!
>
>
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.8.2/29 - Release Date: 6/27/2005
More information about the Elecraft
mailing list