[Elecraft] KIO2 troubleshooting

[Jason Marten]

Thanks for the time looking at this everyone.  I was just worried about P4-7 
because the manual says there should be 4.5 V there.  I do not have KSB2, 
tho.

Yes, the port menu item is on.

I'll look at the KIO2 and AUX boards a little more closely.  My computer 
hasn't got any serial ports, so I'm using a USB to Serial converter (set to 
the specs listed in the manual).  It's worked on other hardware, like my 
GPS.  It has some LEDs on it showing traffic back and forth.  My computer is 
trying to send commands to the KIO2, but nothing is coming back based on the 
LED status.  I did try the Port menu test option, and the K2 shows "test" on 
its display, but nothing lights up on the USB/Serial converter.

-----Original Message-----

Jason,

Nothing in that list is truely abnormal, and they are certainly not
associated with anything that flows through the KIO2.  You should be looking
elsewhere for the source of your problem.

Are you certain that the PORT parameter in the menu is set to ON.

73,
Don W3FPR