[Elecraft] KPA100 power on 20m/30m, update

[Mike Markowski]

I repeated the procedures that dealt with adjustments on the board, but
skipped over things like the temperature calibration and current limit
steps.

Mike  AB3AP

Jean-François Ménard wrote on 06/22/05 12:56 ET:
> Did you redo an alignment of the KPA100 after, or you just changed the 2
> caps ?
> 
> -----Message d'origine-----
> De : elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] De la part de Mike Markowski
> Envoyé : 22 juin 2005 12:36
> Cc : Elecraft Reflector
> Objet : Re: [Elecraft] KPA100 power on 20m/30m, update
> 
> Vic Rosenthal wrote on 06/22/05 12:22 ET:
> 
>>Stewart Baker wrote:
>>
>>
>>>I had problems with HI CUR on 14 & 18MHz,  3.6 and 3.7 Amps respectively.
>>>Changing C80 & C81 cured the problem, and I now have 2.9 and 2.4 Amps
>>>drawn.
>>
>>What value did you change them to?
> 
> 
> Apparently, all new kits will use 5600 pF, 5% caps for C80 and C81.
> 
> Mike  AB3AP