[Elecraft] Time to take the plunge...

[NZ8J]

Thanks to all for the good wishes and suggestions on solder.. I'll be
calling Elecraft on Monday to order a K2 and accessories..
73
Tim
NZ8J
----- Original Message -----
From: "NZ8J" <nz8j at woh.rr.com>
To: <elecraft at mailman.qth.net>
Sent: Friday, June 17, 2005 1:49 AM
Subject: [Elecraft] Time to take the plunge...


> Due to circumstances beyond my control I find myself with 5 or 6 weeks of
> VERY idle time on my hands.  I've pretty much decided to order a K2 with
> some accessories in the next day or so and work my way through it. I'll
> probably only be able to put in 60 to 90 minutes of work at a time before
I
> have to let my old eyes and body rest for a few hours, but I figure I'll
get
> through it eventually.  I had heart bypass surgery last week and now will
> have plenty of free time on my hands during the recoup period.  Anyone
know
> what serial numbers they are up to, I assume they are shipping kits with
> serial numbers over 5K by now?
>
> I have read over  the soldering tutorials  and info on the Elecraft site,
> but don't specifically see the one lb rolls of Kester Solder that I have
on
> the list:
> Kester SN 60OPB40, 66/44 rosin core solder. Dia .031
> Kester Q13852, Alloy = SN63, Core = 66, Dia .031, FLUX = 254
>
> Anyone familiar with these particular Kester versions?
>
> thanks
> Tim
> NZ8J
>
>
>
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>