[Elecraft] Slight K2 Drift When on PSK31

[Leigh L Klotz, Jr.]

Les,
I don't know if this is the problem you are seeing, but it might explain 
some of the issues, and perhaps something else is causing the others.

The filters aren't always at the same offset.  Did you perchance use FL1 
and then switch to a narrower filter?  The K2 always transmits on FL1 so 
if you recenter at FL2 or narrower you will be transmitting with an 
offset, so tmaybe tuning at FL1 and then unchecking NET in your PSK 
software (or using RIT on the K2) is the way to go.

Personally, I hope that a future K2 firmware upgrade includes an extra 
VFO offset that can be used to correct this annoying problem.  It seems 
like a pair of "auto-RIT" settings for each filter would solve it.

73,
Leigh.
On Fri, 10 Jun 2005 3:36 am, Lynn and Les wrote:
> I have now operated K2 S/N 4751 for about a month and everything seems 
> to
> work pretty good. I am mainly a PSK and RTTY operator and I would like 
> to
> know if others have had the same experience about the K2 with PSK.