[Elecraft] k2 s/n 4886, cap C45, page 65

[jon howe]

Sorry, I meant C33, not C45

On Mon, 2005-06-06 at 16:08 -0400, W3FPR - Don Wilhelm wrote:
> I just looked at a K2 RF Board and it leads me to think you are trying to
> place C45 in the wrong spot - there are only 2 holes where C45 is to be
> inserted - the position is to the rear of the board from the 'C45' label and
> right next to the relay.
> 
> Yes, spread the legs of the small capacitor to fit the hole spacing.  That
> action is necessary for several of the capacitors in the bandpass filter
> area.
> 
> 73,
> Don W3FPR
>