[Elecraft] k2 s/n 4886, cap C45, page 65

[W3FPR - Don Wilhelm]

I just looked at a K2 RF Board and it leads me to think you are trying to
place C45 in the wrong spot - there are only 2 holes where C45 is to be
inserted - the position is to the rear of the board from the 'C45' label and
right next to the relay.

Yes, spread the legs of the small capacitor to fit the hole spacing.  That
action is necessary for several of the capacitors in the bandpass filter
area.

73,
Don W3FPR

> -----Original Message-----
>
> Hi:
> Similar to cap C6 on page 57, do I install cap C45 in the outer two of
> the three holes?
> The marked outline suggests that, but that middle hole seems placed
> ideally for the lead spacing of the supplied part.
> 73,
> VE8JJ
>
>
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.6.4 - Release Date: 6/6/2005