[Elecraft] K2 Power Supply

[W3FPR - Don Wilhelm]

Matt,

Not a direct answer to your question, but take a look at my website
www.qsl.net or mirror at http://earthlink.net/~w3fpr article on using a
Smartcharger with the internal battery.  It will keep your battery safely
charged and will power the QRP K2 just fine.
A separate power supply is not necessary with this arrangement, and your
battery life will be improved.  My internal battery finally failed after 5
years of good service, and I believe it failed at that point only because I
left it on the shelf without use or float-charging for over 3 months.

73,
Don W3FPR

> -----Original Message-----
>
> Hi folks,
>
> My K2, #4973 (until this afternoon, I thought it was #4978) is coming
> along fine.  I had the weekend off, so I assembled the control board
> yesterday, the front panel today and I've had a good start on the RF
> board.
>
> What I need is a good quality power supply.  I'm a new ham, so I don't
> have a parts box worthy of the name.  I'll need something to power the
> K2 and recharge its internal battery.
>
> Is there a consensus on power supplies?  You know, the power supply
> every one would buy if they had to start from scratch?  Failing that,
> is there a power supply I definitely don't want to buy?
>
> Any suggestions greatly appreciated.
>
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.6.2 - Release Date: 6/4/2005