[Elecraft] If you were to do it all over again

[W3FPR - Don Wilhelm]

Lee,

1). Put the KSB2 components on the front panel before mounting the pots on
the FP board.
2). Install all option headers as you build the RF Board - I use jumpers in
the headers instead of the jumpers on the board - (unmodules would work
too).
3) Other than the above, follow all instructions in order.

OK, that is how I do it, and I have built many K2s (really havn't counted),
so keep in mind I am very familiar with the process - If you feel
uncomfortable about your ability to find a problem should it arise, then
just do the instructions one at a time just like they are printed in the
manual and ignore the way I do it.  Yes, the manual is THAT good - it is
even better than it was when you built your last K2.

73,
Don W3FPR

> -----Original Message-----
>
> Elecraftians.....
>
> If you were going to build another K2 (and I know
> there are many of you who have built quite a few) what
> things would you do differently from the first build?
>
> Lee Buller - K0WA
>
>
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.338 / Virus Database: 267.9.5/58 - Release Date: 7/25/2005