[Elecraft] K2 Balun Enclosure
Dave G3VGR
dave.g3vgr at ntlworld.com
Mon Jul 18 18:11:06 EDT 2005
I discarded most of the bits of the kit, retaining only the ferrite core &
wire. After winding the balun, I put it in a piece of 1.5" Schedule 40 pipe
with 2 endcaps. One endcap was drilled to take a SO239 and the other fitted
with 2 stainless steel eyebolts.
73, Dave G3VGR
----- Original Message -----
From: "Pawlak, Daniel" <Daniel.Pawlak at gd-ais.com>
To: <elecraft at mailman.qth.net>
Sent: Monday, July 18, 2005 8:16 PM
Subject: RE: [Elecraft] K2 Balun Enclosure
Any thoughts on weatherproofing the BL-1 for outdoor installation? I plan on
running coax from my K2 out the side of the house to the balun and then to a
longwire. It seems the RS project could be sealed, but would the plastic
case weather well?
Thanks.
Dan KF4KKF
-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of n2fq
Sent: Monday, July 18, 2005 1:07 PM
To: EricJ
Cc: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K2 Balun Enclosure
EricJ wrote:
>Not NICER, but different. I stuck mine in the traditional Altoids tin.
>
>
Hello..
Thanks for the correction. I did mean different.
I didn't think of removing the terminals nor the BNC connector.
Great idea.
But must confess that I can't make a decent holes in Altoid tins.
Probably will
invest in a step bit some day.
take care and thanks. Great photos on the other modules too, they all
look very
slick.
EricJ wrote:
--
73
Fernando N2FQ/NNNØJYM
San Jose, CA
<http://pages.sbcglobal.net/n2fq>
_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.9.1/51 - Release Date: 18/07/2005
More information about the Elecraft
mailing list