[Elecraft] Remote KPA100
Steven Pituch
spituch at ev1.net
Mon Jul 18 12:51:40 EDT 2005
Hi all,
I had a slight problem with my KPA100, but fixed it. I had neglected to
solder pin 1 of U1. Its just something about seeing a round land
instead of the rectangular ones and skipping over it when soldering
thinking it was another part. Got that fixed pretty quickly but have
one more problem.
I first installed the KPA100 in the K2 and it works perfectly as much as
I can tell. I then hooked up the KAT100 in the EC2 enclosure with the
cable it it seems to work fine.
I then installed the KPA100 in the EC2 enclosure along with the KAT100
and I am getting weird things happening. I am now mostly getting the
info 080 when turning on the K2 after turning on the kat100 first. I am
doing this with the kat2 installed in the k2 and using ant1 to feed the
aux rf on the kat100 faceplate. I think I am doing everything per the
manuals, but you know me, I could have missed a few important items in
the instructions.
If anyone has a suggestion I would appreciate it. I will doing some
more testing soon.
Steve, W2MY
More information about the Elecraft
mailing list