[Elecraft] RE: [N1MM] Elecraft K2 and N1MM logger serial com. (stopbit)

[Carel, pc5m]

Hi Don (both Don's w3fpr and n4hh)
 
Thanks for the reply, I have checked it again and it seems to be intermitted
(sometimes only one stopbit works, on  other occasions also 2 is
working...). Strange behaviour, I will first check with some other HW/PC as
I understand you are getting well performance with both settings.
 
If I find something out I will come back to this reflector.
 
gl, 
 
Carel, pc5m

________________________________

From: N1MMLogger at yahoogroups.com [mailto:N1MMLogger at yahoogroups.com] On
Behalf Of Don Nesbitt
Sent: Saturday, July 16, 2005 3:08 PM
To: N1MMLogger at yahoogroups.com
Subject: Re: [N1MM] Elecraft K2 and N1MM logger serial com. (stopbit)


Carel - my K2 (#2028) with KPA100 works equally well
with either 1 or 2 stopbits selected.  Using either an
old IBM 380 ED laptop or a new Compaq 2.4 ghz laptop
with N1MM (v 5.0.128).

I have not tried to see if it might be dependent on a
particular KIO2 board.  I do have KIO2's in both my
qrp tops but they are not easily available for
testing.  73 es gud dxing -- Don N4HH

--- "Carel, pc5m" <pc5m at xs4all.nl> wrote:

> Hi,
>  
> Fired up my K2 Elecraft (#4927) with N1MM Logger
> program and found out that
> it will only work with "1" stopbit (remaining
> parameters are confirmed).
> This is in contrast to both the n1mm manual (use
> default Kenwood parameters
> of 2 stopbits) and  the K2 KPA100 manual saying that
> 2 stop bits should also
> work. 
>  
> Also verified this behaviour with "Hyperterminal"
> only 4800 baud, 8
> databits, no parity, no hardware control and ONE
> stopbit is functioning.
>  
> Don't know if more people have been seeing this, if
> yes maybe the manual(s)
> can make a note of it, if no it is just my PC
> hardware and this email can be
> discarded !
>  
> 73'3
>  
> Carel, pc5m
> 
> 
> [Non-text portions of this message have been
> removed]
> 
> 



            
____________________________________________________
Start your day with Yahoo! - make it your home page 
http://www.yahoo.com/r/hs 



To unsubscribe, send an email to:
N1MMLogger-unsubscribe at yahoogroups.com





________________________________

YAHOO! GROUPS LINKS 


	*	 Visit your group "N1MMLogger
<http://groups.yahoo.com/group/N1MMLogger> " on the web.
	  
*	 To unsubscribe from this group, send an email to:
	 N1MMLogger-unsubscribe at yahoogroups.com
<mailto:N1MMLogger-unsubscribe at yahoogroups.com?subject=Unsubscribe> 
	  
*	 Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> . 


________________________________