[Elecraft] K2 #4983 is up and running

[Jason Hissong]

Don,

Thanks for the reply.  They stick a little longer than that, but I 
checked the transistors and they appear to be in contact over their 
entire area.

Thanks again... cannot wait for the fox hunt tonight.

73,
Jason N8XE

W3FPR - Don Wilhelm wrote:

>Jason,
>
>If the transistor tabs are in contact with the heat sink over their entire
>surface area, you did it right.  It is normal for the pins to dtick about
>1/8 inch above the board.  You can clip them off or leave them as is - your
>choice.
>
>73,
>Don W3FPR
>
>
>  
>