[Elecraft] XV144 Transverter 1.05 KHz off

[Ron D'Eau Claire]

That could be simply a normal frequency error in the local oscillator
crystal. The K2 firmware includes an adjustment to set the frequency exactly
on. To access this command, enable the K2 SECONDARY MENU for the transverter
number you have assigned to your XV144, hold MENU to move the cursor to On
for the transverter, then press DISPLAY until you reach OFS (offset). The
value you dial in here (plus or minus) introduces an offset in the K2
readout that corrects for the xtal frequency error in your transverter.

Ron AC7AC