[Elecraft] KFL1-2 vs KFL1-4

[Lonnie Juli]

Don,

Yes, yes, please, please. I'd love to put the K1 on 160! Please send the
info.

73,

Lonnie

-----Original Message-----
From: W3FPR - Don Wilhelm [mailto:w3fpr at earthlink.net] 
Sent: Tuesday, January 25, 2005 9:35 PM
To: lonnie.m.juli at verizon.net
Subject: Re: [Elecraft] KFL1-2 vs KFL1-4

Lonnie,

I see yo already have a good answer, but I thought I might point out that I 
have added 160 meters to a 2 band K1 board for another ham - I can send you 
the instructions and parts list if you would like to do something like that.

BTW, if you have the ATU in your K1, you will have to have an extra set of 
ATU headers for the additional board.

73,
Don W3FPR
----- Original Message ----- 
From: <lonnie.m.juli at verizon.net>
To: <elecraft at mailman.qth.net>
Sent: Tuesday, January 25, 2005 4:30 PM
Subject: [Elecraft] KFL1-2 vs KFL1-4


> Hello experts!
>
> I own a 4 band K1 with 40m, 30m, 20m and 15m installed. I have just 
> ordered a KFL1-2 for 80m and 40m to take advantage of the current 
> propagation conditions. In reading the Instruction Sheet for the 80m band,

> I came across the reference to C78 (10 uf) installed on the bottom of the 
> RF board. What is the impact of C78 when I switch back to my KFL1-4? Will 
> it have any impact on the four band board?
>
> Thanks and 73,
>
> Lonnie NY2LJ
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>