[Elecraft] K2 Frequency Jumps

[n6wg at comcast.net]

Dave
Does the K2 jump frquency only at that one spot, or about every 5 kHz across the band?
If the latter, it may be you need to do the CAL PLL routine.  I just went through that to
reduce the click when crossing over the PLL 5kHz boundaries.
Tom Hammond put me on to this, and it seems to have worked for me.  A good procedure
is written upon W3FPR's web page.
Good luck and 73
Bob N6WG


> Hello folks:
> 
> My K2 has developed a problem where the frequency seems to jump or skip about .5 
> kHz when tuning across the bands.  For instance, when tuning from 14056.34 to 
> 14056.35, the beat note from CW stations suddenly jumps about 500 Hz.  It does 
> it on other bands and frequencies and is repeatable from one day to the next.
> 
> The digital frequency display looks and acts normal.
> 
> Any ideas?
> 
> David Bixler  W0CH
> Seneca, MO
> 
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com