[Elecraft] K2 turning power behavior

[S55M]

OK.I will write it down agn step by step...


1.Turn Power button to 0,1W (full left)

2.Press PTT

3.When on TX without releasing PTT turn power up over 10W limit to turn on
100W PA.

When i do this my K2 stops transmiting above the 10W point (when KPA100
clicks up).
The only thing to do then is to release PTT and press it again and "voila"
on the AIR again.

If i go in reverse direction (turning power from 100Wtts to less then 10W)
everything works fine!

K2 Nr-3204 SW- 1.09 and 2.04

It's not a problem but must be a hint.....


S55M-Adi


----- Original Message ----- 
From: "Donald Nesbitt" <drnesbitt at bellsouth.net>
To: "Michael Harris" <mike.harris at horizon.co.fk>; "S55M" <s55m at siol.com>;
<Elecraft at mailman.qth.net>
Sent: Friday, January 21, 2005 12:00 AM
Subject: Re: [Elecraft] K2 turning power behavior


> Not on mine either.  73  --don n4hh K2/100/KAT100 #2028
> ----- Original Message ----- 
> From: "Michael Harris" <mike.harris at horizon.co.fk>
> To: "S55M" <s55m at siol.com>; <Elecraft at mailman.qth.net>
> Sent: Thursday, January 20, 2005 5:22 PM
> Subject: Re: [Elecraft] K2 turning power behavior
>
>
> > G'day,
> >
> > <snipo>
> > So...if i press the PTT (dot line on keyer when on USB) without talking
> > (or maybe also with ssb modulation because i did not test it) and turn
the
> > power button on 100W and then reduce the power back to minimum my K2
stops
> > transmitting.I must then release the PTT and press it again to go into
TX
> > mode.
> > Is this happening with all K2's?
> > <snipo>
> >
> > Not on #1400 (external KPA100/KAT100 combo) unless I've read the above
> > incorrectly.
> >
> > Regards,
> >
> > Mike VP8NO
>
>
>
> -- 
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05
>