[Elecraft] ref osc clicks, really bothers me

[wooyihan at hotmail.com]

be grateful to all who helps me  with the pll click problem  of=
 my k2,thanks to Don/W3FPR,Tom/N0SS and Gary/KI4GGX.

 Apologies for a typing mistake that my ref osc's frequency is=
 12090.36,not 12096.36 while voltage=3D0v,so the range is little=
 more than 10khz.

however,it still clicks and pop after i checked all components=
 and redid pll cal after i calibrated the frequency counter at=
 accuracy of 10hz,i suppose it's too close to the up boundary of=
 rang where linearizing begin,so i'm waiting for the replacement=
 of 12uH induct to see if it could give a wider range to avoid=
 the clicks.

=09

=A1=A173 

=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1william/bg8aqa
=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1wooyihan at hotmail.com
=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A12005-01-20