[Elecraft] Another Question

[Ed Palmer]

On the RF board on my K2 in the 20/30  BPF area I can inject a signal on 20 meters either side of C22 and between C22 and C24. I'm not however able to inject a signal between C24 and C25. 

With the antenna connected I can get a signal across C24 by either jumping across its leads on top of the board or across the pads on the bottom of the board with a 47pF disc capacitor that I have on hand. By being able to get a signal jumping across C24 both top and bottom locations on the board I think I can rule out soldering?

Maybe C24 is bad? I touched up the soldering but have the same result. Am I barking up the wrong tree?

73, Ed N0EHQ