[Elecraft] K2 Un-module for KDSP2

[W3FPR - Don Wilhelm]

Gil,

The 'un-module' consists only of 2 wires - pin 1 of J1 connects to pin 1 of 
J2 and pin 2 of J1 connects to pin 2 of J2.
I just use 2 bent wires (component leads) between the 2 headers.  Of course, 
a piece of PC board with pins in the correct places would be more 
convenient - perhaps I will get aroung to building one someday, but for now 
the 2 wire jumpers do the job.

73,
Don W3FPR

----- Original Message ----- 

>
> Has anyone designed and made an Un-module for the KDSP2 or KAF2?  KE1L's 
> site does not list one.
> http://w5big.home.comcast.net/K2_Un-modules.htm
> I need to do some troubleshooting and want to avoid removing/replacing 
> board parts when I remove KDSP2 out of circuit.  Tnx.
>
> 73/Gil NN4CW
> K2 #3104; KX1 #53