[Elecraft] KAT2

[Joe - aa4nn]

Find installation of R6 as follows:
Page 17, last step before the paragraph:  Power Calibration (R1 and R2)
Congrats and good luck.
73, Joe, aa4nn
----------------------------

> I have just completed building my KAT2 for K2 SN4519.  I have one 
> resistor, R6, left over and upon several rereads of the manual I cannot 
> find a definite instruction to install it.  I know where it goes, of 
> course, but is it assumed that you install it after  R3,4, and 5?
>