[Elecraft] Power to K2/100 Observation

[Unifiedtx at aol.com]

I found that powering the K2 and the KPA100 separately causes the resistor  
R13 in the KPA100 to get hot to the touch.  When the power is removed from  the 
K2 and using power only to the KPA100, R13 runs cool.  Maybe R13  was put 
behind the fan for a reason.  I believe it it best to run the  K2/100 with power 
supplied only by the Anderson Power Pole connector.  Just  an observation.   
Roy Morris   W4WFB