[Elecraft] Trouble with Alignment and Test, Part II - - - MORE INFO

[Mike]

Vic, thanks for the reply.  Just rechecked it and that's not the cause.  It
was in TP1, per the instructions.


----- Original Message -----
From: "Vic Rosenthal" <vic at rakefet.com>
To: "Mike" <mikekopacki at verizon.net>
Cc: "Elecraft" <elecraft at mailman.qth.net>
Sent: Sunday, January 02, 2005 1:41 PM
Subject: Re: [Elecraft] Trouble with Alignment and Test, Part II - - - MORE
INFO


> Mike wrote:
>
> > Info 232.  The troubleshooting section says that the message "...is most
> > likely to be displayed if you use CAL PLL without first selecing 40
meters."
> > I am, of course, selecting 40 meters.  So it looks like it is not
recognizing
> > the fact that 40 meters is selected.
>
> Another common cause of this is not having the probe in the correct test
point.
>
> --
> 73,
> Vic, K2VCO
> Fresno CA
> http://www.qsl.net/k2vco
>
>