[Elecraft] K2/SSB Construction

[stephen Farthing]

Craig,

    If you read the manual for the K2 and find the section which discusses 
building the display board you will find that you can mount some of the 
display parts for the KSB2 when you build the Display board.......I started 
off using an ANTEX PCB holder to build the Control board until I mounted one 
of the resistor arrays which is very close to the edge of the PCB and this 
made it impossible to use the PCB holder....not sure which one you have so 
your mileage may vary..

Good luck,

Steve G0XAR
----- Original Message ----- 
From: "Craig Miller" <cmiller653 at gmail.com>
To: "Elecraft List" <elecraft at mailman.qth.net>
Sent: Monday, February 28, 2005 1:36 PM
Subject: [Elecraft] K2/SSB Construction


>I just ordered a K2 and SSB adaptor so while I'm anxiously waiting
> delivery I'm trying to get the shack and bench ready for construction.
> I've downloaded and briefly read the manuals and I've come up with
> two questions (the first of many I'm sure).
> 1. Are there any mods (part additions or deletions) that need to be
> done to the base K2 if the SSB adaptor is going to be added?  Is there
> anything I should watch out for to prepare the K2 for the SSB board?
>
> 2. Are there any recommendations for a vise to hold the PC boards
> during construction.  I've got access to a Panavise with about 6"
> capacity jaws; is this big enough?
>
> Any thoughts will be appreciated.  Thanks for the help.
>
> Craig Miller
> K3OOL
> K2 S/N: ????
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.300 / Virus Database: 266.5.2 - Release Date: 28/02/2005
>
> 



-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 266.5.2 - Release Date: 28/02/2005