[Elecraft] K2/SSB Construction

[Jean-François Ménard]

Nothing special on my side. Just be sure to your kit include the latest mods
about the SSB bandwidth... 2.4 kHz instead of 2.2 kHz... Should be there now
on lastest version.

Be sure to pay attention at the toroids... They are smaller than those in
the K2, and the enamel wire is easely scratchable... ;-) And also be
carefully to ground the xtals properly....

73


-----Message d'origine-----
De : elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] De la part de Craig Miller
Envoyé : 28 février 2005 08:37
À : Elecraft List
Objet : [Elecraft] K2/SSB Construction


I just ordered a K2 and SSB adaptor so while I'm anxiously waiting delivery
I'm trying to get the shack and bench ready for construction.  I've
downloaded and briefly read the manuals and I've come up with two questions
(the first of many I'm sure). 1. Are there any mods (part additions or
deletions) that need to be done to the base K2 if the SSB adaptor is going
to be added?  Is there anything I should watch out for to prepare the K2 for
the SSB board?

2. Are there any recommendations for a vise to hold the PC boards during
construction.  I've got access to a Panavise with about 6" capacity jaws; is
this big enough?

Any thoughts will be appreciated.  Thanks for the help.

Craig Miller
K3OOL
K2 S/N: ????
_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com