[Elecraft] K2 upgrade mods tactical planning [was:Re: Return
of the prodigal daughter]
Vic Rosenthal
vic at rakefet.com
Wed Feb 23 13:41:07 EST 2005
Ron D'Eau Claire wrote:
> The oscillator stability mods really show up mostly on the higher-frequency
> bands above 20 meters. On the lower bands, the drift in these oscillators
> tend to cancel, but on the bands above 20 they add due to the way the
> mixing scheme works. That can produce excessive drift on the higher bands.
>
> I'd not hesitate to operate the K2 without the mods in any but the most
> demanding service such as PSK31 and then only be really concerned on the
> higher bands.
Ron is correct, but I'd like to add that the VFO stability mod should be
considered a must if you are planning to add a KPA100. The extra heat will
cause very noticeable drift.
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
More information about the Elecraft
mailing list