[Elecraft] wiring motorola amplified speaker for K2

[Lutz Pflughaupt]

Am Sonntag, 20. Februar 2005 00:44 schrieb Tim Logan:
Hi all
i´m using a NSM6054A and it works great.
Wiring:
orange/red   +12V
black/brown ground
white             AF ground
blue               AF input
green           squelch   connected to +12V means squelch off
good luck de Lutz DL7AVC

> I know some of you have used Motorola amplified speakers.....I have one
> and the one thing is not clear. Two of the wires are referred to as
> "audio up" and "audio down". The remaining 3 wires are for power supply
> and squelch......not sure how the two audio wires and "squelch" would
> get connected to a speaker jack for the K2......does this wiring
> resemble anyone's and if so how did you rig up the speaker? Thanks in
> advance.
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com