[Elecraft] K2 S/n 01432 ..Side Panel Question..?

[Andy GM0NWI]

Guy's...

I'm currenly "stuck fast"...on a "problem" deciphering exactly what the "K2 
Manual" means as regard the orientation of the "2-D fastners" to the "side 
panels" on page 37 ..

I have removed (as far as I can see..!) all the green "masking tape" from 
the areas where it was stuck down to on the side panels (..on BOTH my side 
panels..this is 2 areas rectangular in shape..on the bottom (horizonatal 
plane) of each of the side panels)... there appears to be no other parts 
that are "masked" .....

On the drawing in the "K2 Manual" on page 37, the picture "appears" to show 
3 areas of "masking" on each side panel...  they are "mirrored" images of 
each other, with "masking" in the "top left" on the horizontal plane of one 
side panel....and then on the "top right" on the horizontal plane of the 
other panel...  Also there is indication that the side panels have also 
"masking" on the "right hand side" vertical plane...and also "left hand 
side" vertical plane...

Thats "if" I am reading the drawing in the manual correctly..??

However MY panels do NOT have these areas "masked" at all..!!  I only "seem" 
to have 2 areas on each side panel "masked" ...and BOTH are on the 
"horizontal plane" when "mirrored" against each other...

This is where the "problem" I am having comes in... I cant seem to get my 
head around, which way to orientate the 2D fasteners onto the areas that I 
have which were previously "masked".... as they dont match up with the 
drawings in my manual, as far as I can tell...

At the moment I have 1 2D fastener on EACH "unmasked" area on EACH 
panel,....the 2D fasteners are orientated "vertically" as apposed to the 
side panels being "horizontal"...  I feel that this "may" be the wrong way 
to go...

Can someone please advise me as to the correct proceedure for mounting these 
2D fasteners to their respective side panels, so I may carry on with the 
next part in the manual...??

Thanks again guys.....much appreciated....

Andy 
andy.gm0nwi1 at btinternet.com          "...I Just See It.!.."  John A. Ross 
(RSD Communications circa 2004)
A.R.S.
GM0NWI QRP                                       "..It is vain to do with 
more....             "A Dis-Orientated Kiwi...
"K2 S/n 01432 Soon To Be On-Air"                    what can be done with 
less..             In The Northern Hemisphere..."

GQRP No.9576
QRP-L No.2165
ARCI No.10561
Alaska QRP Club No.190
Flying Pigs QRP Club No. FP#-1061
ICQ No.31899603